Four-Piece Maze Jacquard Recliner Cover with Pocket

Product Overview

This fitted one-seat set uses four maze-pattern jacquard sections for the chair back, front, left arm and right arm. A side pocket appears on an arm section, while the 1S option is available in nine solid colors.

Choose by chair type, seat count, piece count, panel measurements, color and fastening layout. Measure the recliner both closed and fully extended; panel dimensions describe the cover itself and do not promise fit on every chair.

Key Features

four separately fitted sections
maze-pattern jacquard surface
Back, Front, Left and Right layout shown
side pocket shown
nine solid-color options

Install only while the chair is unoccupied and disconnect power when applicable. Keep fabric, pockets, straps, buckles and loose edges clear of hinges, scissor mechanisms, footrest tracks, motors, controls and cords. Cycle the chair slowly without an occupant after fitting. Stop use if the cover shifts, bunches, catches or restricts travel. Keep children and pets away from the mechanism during installation and operation. The cover is not a restraint, load support, heat barrier or liquid-containment device.

Specifications

Product type	Recliner Cover
Seat count	1 recliner seat / 1S
Piece count	4 sections shown
Back width range shown	68.6-99 cm / 27-39 in
Chair height range shown	102-127 cm / 40-50 in
Arm section range shown	76-101 cm / 30-40 in
Front section range shown	58-89 cm / 23-35 in
Colors	Cream Yellow; Khaki; Light Gray; Black; Deep Coffee; Grayish Green; Dark Gray; Navy Blue; Red

Follow the delivered care label rather than assuming a wash or drying method. Blot liquid promptly, keep powered parts dry and inspect seams, pockets, straps and buckles before each use.

Frequently Asked Questions

Which chair type and seat count is this for?

For one-seat recliners within the displayed ranges and with four separately coverable sections. The 1S label identifies seat size, not a one-piece construction.

What pieces are included, and how do I map left and right?

Use the section labels shown in the guide: Back on the chair back, Front over the seat and footrest, and Left and Right on their correspondingly labeled arms. Keep the pocket on the outward-facing side and do not swap sides based on a mirrored image.

How should I measure and keep the cover positioned?

Measure the chair back, seat, arms and extended footrest against every listed panel dimension. Use only the shown straps, buckles or fitted sections, recheck them after cycling the chair, and never force fabric into gaps to make a mismatched size appear to fit.

What safety and care checks are required?

Fit and inspect the cover with the chair empty. Keep every edge and fastener outside moving hardware, follow the delivered care label, blot liquid promptly, and remove the cover if it catches, shifts toward the mechanism or interferes with a control.